Float type Steam Trap

AF-15 and 16 are available for heat exchange devices and for bigger volume drain etc.

Features

1. Thermo type airvent valve is used inside to prevent air blocking.
2. Applicable pressure range is wide to use.
3. Model AF-15F can be used also in the vertical pipe line by changing the cover position as shown below.

AF-16F

Model AF-16F Pressure For 0.9MPa Type Float type Size 50 Applicable fluid Steam Applicable pressure Max. 0.9MPa Applicable temperature Max. 180 Deg.C Allowable back pressure Within 90% of inlet pressure (min. pressure : 0.02MPa) End connection Flanged JIS 10K FF Materials Body(Cost iron) Disc, seat, and float(stainless steel) Installation On horizontal pipe only Valve body press, test Hydraulic 1.5MPa

AF-15F

Model AF-15F Pressure For 0.4MPa For 0.9MPa Type Float type Size 20 - 50 Applicable fluid Steam Applicable pressure Max. 0.4MPa Max. 0.9MPa Applicable temperature Max. 180 Deg.C Allowable back pressure Within 90% of inlet pressure End connection Flanged JIS 10K FF Materials Body(Cast iron), Disc seat and float(Stainless steel) Installation On horizontal and vertical pipe Valve body press, test Hydraulic 1.5MPa

Table for capacity (Max. continual discharge amount)

(unit:m3/h)
AF-16F

Pressure differential(MPa)	0.05	0.1	0.2	0.4	0.5	0.6	0.7	0.8	0.9
Discharge amount	1.87	2.65	3.75	5.3	5.92	6.49	7.0	7.5	7.95

AF-15F(for 0.4MPa)

Pressure differential(MPa)	0.05	0.1	0.2	0.4
Size 20 - 32	0.57	0.80	1.15	1.55
Size 40/50	1.97	2.86	3.91	5.0

AF-15F(for 0.9MPa)

Pressure differential(MPa)	0.1	0.2	0.4	0.5	0.6	0.7	0.8	0.9
Size 20 - 32	0.43	0.52	0.68	0.75	0.80	0.86	0.92	0.97
Size 40/50	1.97	2.34	3.0	3.26	3.57	3.82	4.10	4.31

Constructions, Dimensions